aruba控制器show ap后面的命令

show ap
命令 说明 中文
active Show APs currently registered or have some clients 显示当前注册的AP或具有某些客户端
terminating (in cluster) on this switch 在此交换机上终止(在群集中)
allowed-channels Show the set of allowed channels 显示允许的频道集
allowed-max-EIRP Show max EIRP setting per country per AP type 显示每个国家/地区/AP类型的最大EIRP设置
amon Show AMON message information 显示AMON消息信息
analytics Recommendations from Analytics 分析的建议
antenna-status Show operational status of AP antennas 显示AP天线的工作状态
ap-cert-mgr Show contents of /tmp/ap_cert_mgr_debug_log for an AP 显示ap的/tmp/ap_cert_mgr_debug_log的内容
ap-group Show contents of AP’s group 显示AP组的内容
arm Show ARM Information 显示ARM信息
assoc-throttle-counters Show counters related to association request throttling. assoc节流计数器显示与关联请求节流相关的计数器。
association Show Association table for an AP 显示AP的关联表
authorization-profile Show an AP Authorization profile 显示AP授权配置文件
band-steering-clients Show Band Steering State 显示波段转向状态
denylist-clients Show all clients being DoSed 显示所有被拒绝的客户端
denylist-protected Show all clients that are currently protected against 显示当前受保护的所有客户端
further traffic steering related DoS actions for a 的进一步流量导向相关DoS操作
period of time 一段时间
denylist-time Show the amount of time of the STA when it is added to 显示STA添加到的时间量
the denylist in between disconnection and user-timeout 介于断开连接和用户超时之间的denylist
ble-database Show BLE APB information collected by BLE relay 显示BLE继电器收集的BLE APB信息
ble-ibeacon-info Show AP’s BLE radio iBeacon parameters 显示AP的BLE收音机iBeacon参数
bss-table Show bssids of all APs registered on this switch 显示在此交换机上注册的所有AP的bssid
bw-report Show bandwidth allocation report for an AP 显示AP的带宽分配报告
cellular Show cellular information 显示蜂窝信息
client Show wireless client specific information 显示无线客户端特定信息
cluster-tech-support Display cluster information for an AP 显示AP的群集信息
config Show AP configuration parameters. Must specify ap-name 显示AP配置参数。必须指定ap名称
and/or ap-group and optionally essid. 和/或ap组和任选的essid。
consolidated-provision Show consolidated provision 显示合并准备金
convert-download-log show conversion image downloading logs. 显示转换图像下载日志。
convert-image-list list all available images for conversion. 列出所有可供转换的图像。
convert-setup-image-log show conversion setup image logs. 显示转换设置图像日志。
convert-status Show status of AP image conversion operation 显示AP图像转换操作的状态
convert-status-list Show only the list of APs and their conversion statuses. 仅显示AP及其转换状态的列表。
convert-status-summary  Show summary of status of conversion operation (the 显示转换操作的状态摘要(
list of APs is omitted) 省略了AP列表)
database Show list of access points this switch knows about 显示此交换机知道的接入点列表
database-summary Show summary of access points this switch knows about 显示此交换机了解的接入点摘要
debug Show debugging information of an AP 显示AP的调试信息
deploy-profile Show the ap deploy-profile 显示ap部署配置文件
details Show details about an AP. 显示有关AP的详细信息。
enet-link-profile Show an AP Ethernet Link profile 显示AP以太网链路配置文件
essid Show ESSID Information 显示ESSID信息
est-status Show contents of /tmp/est_status for an AP 显示AP的/tmp/est_status的内容
general-profile Show the ap general-profile 显示ap常规配置文件
get-crash-dumps-status Show get crash dumps status 显示获取崩溃转储状态
global Show AP’s central Database 显示AP的中央数据库
gps GPS 全球定位系统
greenap AP which supports green mode 支持绿色模式的AP
he-rates Show high-efficiency rate information for a BSS 显示BSS的高效速率信息
ht-rates Show high-throughput rate information for a BSS 显示BSS的高吞吐量信息
image Displays Image version 显示图像版本
image-preload Show status of AP image preload operation 显示AP图像预加载操作的状态
ip health check ip probe mode 健康检查ip探测模式
license-usage Show AP license usage information 显示AP许可证使用信息
lldp Link-layer Discovery Protocol 链路层发现协议
load-balancing Show All BSS where load balancing is enabled 显示启用负载平衡的所有BSS
mesh Display all information for a Mesh AP 显示网格AP的所有信息
mesh-accesslist-profile Show a Mesh Accesslist profile 显示网格访问列表配置文件
mesh-cluster-profile Show a Mesh Cluster profile 显示网格簇轮廓
mesh-ht-ssid-profile Show a Mesh High-throughput SSID profile 显示网格高吞吐量SSID配置文件
mesh-radio-profile Show a Mesh Radio profile 显示网格无线电配置文件
mesh-recovery-profile Show mesh recovery profile information 显示网格恢复配置文件信息
mfg-image-download-log show manufacturing image downloading logs. 显示生产图像下载日志。
mfg-image-setup-image.. show manufacturing image upgrade setup image logs. 显示制造映像升级设置映像日志。
mfg-image-upgrade Show status of AP manufacturing image upgrade operation 显示AP制造图像升级操作的状态
mfg-image-upgrade-list list all available images for upgrade. 列出所有可升级的映像。
mfg-image-upgrade-sta.. Show only the list of APs and their upgrade statuses. 仅显示AP及其升级状态的列表。
mfg-image-upgrade-sta.. Show summary of status of image upgrade operation (the 显示映像升级操作的状态摘要(
list of APs is omitted) 省略了AP列表)
modem-download-log show modem image downloading logs. 显示调制解调器映像下载日志。
modem-upgrade-status Show status of AP modem upgrade 显示AP调制解调器升级的状态
monitor Show Air Monitor information 显示空气监测器信息
multizone-profile Show an AP multizone profile 显示AP多区域配置文件
network-check Network Check 网络检查
owe-tm-info Information about OWE Transition VAPs generated 生成的OWE过渡VAP信息
packet-capture Packet Capture commands 数据包捕获命令
papi-err Show papi send error on current SAP of controller STM 在控制器STM的当前SAP上显示papi发送错误
port Show AP wired port information 显示AP有线端口信息
power-mgmt-statistics Show AP power status statistics 显示AP电源状态统计信息
profile-usage Show configuration profiles in use by an AP or a 显示AP或
specific BSSID. 特定BSSID。
provisioning Show provisioning parameters an AP is currently using 显示AP当前正在使用的配置参数
provisioning-profile Show a Provisioning profile 显示资源调配配置文件
provisioning-rule Show an ap provisioning rule 显示ap设置规则
provisioning-rules Show the ap provisioning rules 显示ap配置规则
radio-database Show radio information for access points this switch 显示此交换机接入点的无线电信息
knows about 知道的
radio-summary Show AP radios currently registered on this switch 显示当前在此交换机上注册的AP无线电
ranging-results show ranging results 显示测距结果
regulatory Regulatory version used by APs AP使用的监管版本
regulatory-domain-pro.. Show a Regulatory Domain profile 显示监管域配置文件
remote Show information from AP 显示来自AP的信息
remote-packet-capture Remote Packet Capture commands 远程数据包捕获命令
sapd-debug Show contents of /tmp/sapd_debug for an AP 显示AP的/tmp/sapd_debug的内容
snmp Display SNMP Tables 显示SNMP表
spectrum Show Spectrum Monitor information 显示频谱监视器信息
spectrum-load-balancing Show spectrum load balancing information 显示频谱负载平衡信息
standby Show Standby APs currently registered on this switch 显示当前在此交换机上注册的备用AP
system-profile Show an AP system profile 显示AP系统配置文件
tech-support Display all information for an AP 显示AP的所有信息
thermal AP which in overheat AP过热
uac-database Show UAC AP database for cluster 显示群集的UAC AP数据库
usb Show usb information 显示usb信息
usb-acl-prof Show an AP USB ACL profile 显示AP USB ACL配置文件
usb-device-mgmt USB device management USB设备管理
usb-profile Show an AP USB profile 显示AP USB配置文件
vht-rates Show very-high-throughput rate information for a BSS 显示BSS的极高吞吐率信息
virtual-beacon-report Show Virtual Beacon report for client 显示客户端的虚拟信标报告
vlan-mcast Show user count in each vlan and timestamps for tunnel 显示每个vlan中的用户计数和隧道的时间戳
to join/leave vlan-mcast group 加入/离开vlan mcast组
vlan-usage Show client VLAN usage 显示客户端VLAN使用情况
wifi-uplink WiFi uplink commands WiFi上行链路命令
wifi-uplink-profile Show a WiFi uplink profile 显示WiFi上行链路配置文件
wired Wired Info 有线信息
wired-ap-profile Show a Wired AP profile 显示有线AP配置文件
wired-port-profile Show an AP wired port profile 显示AP有线端口配置文件
wmm-flow Show WMM Flows active on the AP 在AP上显示活动的WMM流
zigbee-client-database Show all AP’s Zigbee client information 显示所有AP的Zigbee客户端信息
© 版权声明
THE END
喜欢就支持一下吧
点赞0 分享
评论 抢沙发
头像
欢迎您留下宝贵的见解!
提交
头像

昵称

取消
昵称常用语表情代码图片

    暂无评论内容